The applications of FPZ products in the pulp paper and printing industry
FPZ side channel blowers, dosing pumps and industrial fans find their use in the following fields of application:
- Paper cutting
- Cleaning the rollers
- Drying of the stickers
- Adhesive films and profiles
- Recovery of shavings and powders
- Waste water treatment
- Cellulose treatment
- Recovery of printing solvents
- Abatement of volatile organic substances
Paper cutting
The side channel blower is used to suck away the sparks generated during the sharpening of the blades avoiding direct contact with the paper.
Elimination of sparks – in vacuum
The blower is used near the grinding wheels to suck away the sparks produced by the sharpening of the blades that allow the cutting of the paper reels.
Our solutions
The family of blowers used for the suction of sparks are the MS in MOR configuration.
Available with directly driven motor MOR
MS
Single impeller single stage
Cleaning of the rollers
The side channel blower is used to suck away the solvents used in cleaning the rollers.
Suction of solvents
The blower is used to suck away the nebulized solvents for the routine cleaning of the rollers on the printing lines. The solvents are then led to a special filter which condenses them and expels them from the system.
Our solutions
The MS blower family is used for the elimination of solvents from the plant.
Available with directly driven motor MOR
MS
Single impeller single stage
Drying of the stickers
The side channel blower is used to dry the adhesives following the coating phase.
Adhesive drying – in compression
The blower is used in combination with the Windblade™ air knife inside the ovens to keep the air temperature high and dry the adhesives after the coating phase.
Our solutions
The families of blowers used for drying applications are the MS and TS, which can be combined with the Windblade ™ air knifes.
*Available with directly driven motor MOR and GOR
MS
Single impeller single stage*
TS
Double impeller single stage*
Windblade™
Air Knife
Adhesive films and profiles
The side channel blower is used to adhere decorative films to adhesive profiles.
Decoration of adhesive profiles
The blower is used inside an oven to create a vacuum allowing the decorative film to adhere to the profile. The design on the film is then imprinted on the surface.
Our solutions
The family of blowers used for the decoration of the adhesive profiles are the MS in MOR configuration.
Available with directly driven motor MOR
MS
Single impeller single stage
Recovery of shavings and powders
The side channel blower is used in paper mills to suck up chip and dust residues.
Suction of shavings and dust
The blower is used in paper mills to suck up the various process residues, such as shavings and dust, keeping the environment clean and free of dust which is harmful to operators.
Our solutions
For the suction of shavings and dust MS blowers are used in MOR configuration.
Available with directly driven motor MOR
MS
Single impeller single stage
Waste water treatment
The metering pump is used for the treatment of waste water from the paper industry where there are pollutants, colloids, fibers, chlorides and sulphates.
Dosing of chemicals
The pump is used to dose flocculants, defoamers and biocides into the water to eliminate pollutants, reducing the environmental impact.
Preparation of products
The stirrer is used to mix and prepare the chemicals to be injected into the water.
Our solutions
Spring return or positive return piston pumps are used for water treatment.
SR Series – Type A
Spring return plunger
PDP Series – Type A-I
Positive return plunger
Doseuro is also able to offer a complete system consisting of dosing pump, tank and mixers
Cellulose treatment
The agitator is used in water tanks to bring the wood chips into suspension.
Handling of wood chips
The agitator is used inside the tanks containing water to keep the crumbled wood floating.
Our solutions
EM agitators are used for the treatment of cellulose.
EM – Electric Mixers
Recovery of printing solvents
The fans are used in the printing industry service plants to recover solvents.
Recovery of solvents
The centrifugal fan is used to recover the emissions generated by the printing and lamination processes. The air flow generated by the fan carries the solvents to the blast chillers where they are treated to be reused as ink in printing processes.
Our solutions
The fans suitable for this application are the S, R and P series: fitted with PTFE gaskets in order not to disperse polluting gases into the environment.
ATEX versions
R Series
P Series
S Series
Abatement of volatile organic substances
The fan is used to support the catalytic blast chiller to remove the “VOC” volatile organic compounds.
Removal of volatile organic substances
The fan is used to move the air and transport the VOCs to the catalytic blast chillers.
Our solutions
The S, R and P series are used for the abatement of the “VOCs”. The fans are fitted with PTFE gaskets, in order not to disperse polluting gases into the environment.
ATEX versions
R Series
P Series
S Series
Recovery of shavings and powders
The fan is used to make the working environment in the paper mill clean and healthy .
Suction of shavings and dust
The fan is used in suction to remove shavings and dust from the working environment.
Our solutions
The S, R and P series are the most suitable for the extraction of shavings and dust from the work environment. They are fitted with PTFE gaskets, in order not to disperse polluting gases.
ATEX versions
R Series
P Series
S Series
Download area
Download our FPZ, Doseuro and Arivent catalogues.
